Appletax
Well-Known Member
- Reaction score
- 395
- Location
- Northern Michigan
What should I use?
My first time soldering a new DC jack I used a heat gun and it melted a lot of stuff. No precision like with a soldering iron.
Here's what I have on hand:
Main concern is if the solder that I have is the best choice.
My first time soldering a new DC jack I used a heat gun and it melted a lot of stuff. No precision like with a soldering iron.
Here's what I have on hand:
- Kendal 2 in 1 SMD Hot Air Rework Soldering Iron Station 862D+
- Hakko 599B-02 Solder Tip Cleaning Wire and Holder
- Delcast SL-RL Solder Dispenser Reel
- MG Chemicals 400-NS Series #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green
- Kester 44 Rosin Core 63/37 0.80mm (0.031 inches) 1 lb. Spool
- ChipQuik Flux No Clean Tack 10cc Syringe
- Thermaltronics TMT-TC-2 Lead Free Tip Tinner (20g) in 0.8oz Container
- Engineer SS-02 Solder Sucker
- ProTapes Pro 950 Polyimide Film Tape, 7500V Dielectric Strength, 36 yds Length x 1/2" Width
Main concern is if the solder that I have is the best choice.