Frick
Active Member
- Reaction score
- 105
- Location
- Denver, Colorado
I am working on a Dell XPS L501X laptop that I can not get the NVIDIA display adapter to work correctly. Device manager shows an issue with it listing the device status as "Windows has stopped this device because it has reported problems. (Code 43)"
I have stepped through every method and fix I know of and wanted to check here to see if anyone had any ideas. I am leaning towards a solder problem between the chip and the motherboard...
Here is some info on the laptop:
It has an i5 processor and uses the integrated Intel HD Graphics for the default display adapter.
The secondary display adapter is the NVIDIA GeForce GT 420M. This secondary adapter utilizes NVIDA Optimus technology when configured for specific programs and applications to prolong battery life ( NVIDIA info video describing optimus )
Both display adapters were working fine until the owner purchased a new hard drive, installed it, and reinstalled Windows 7 x64 using his Dell restore disk. He was unable to get the NVIDIA adapter to work and brought the laptop to me.
Initially I thought it probably just a driver version/release issue, but that has not been the case. The drivers install fine for the adapter, but the adapter never works after the required restart. I have tried numerous drivers, the Dell recommended, the latest WHQL NVIDIA and even Beta version.
There are no options in the bios to enable/disable or tweak the display adapters, and since the Intel adapter is used by default that is what is installed when troubleshooting in linux.
I have found a couple similar issues references on Google, but they ended up only being installation issues concerning the adapter version and the install packages needing an inf edit. That does not apply in this case.
My next step will be to test a new windows install on a different hard drive. If that does not fix the issue then I would think it is the motherboard. I can get a new motherboard for a good price, so that is a viable option if it comes down to it.
I have stepped through every method and fix I know of and wanted to check here to see if anyone had any ideas. I am leaning towards a solder problem between the chip and the motherboard...
Here is some info on the laptop:
It has an i5 processor and uses the integrated Intel HD Graphics for the default display adapter.
The secondary display adapter is the NVIDIA GeForce GT 420M. This secondary adapter utilizes NVIDA Optimus technology when configured for specific programs and applications to prolong battery life ( NVIDIA info video describing optimus )
Both display adapters were working fine until the owner purchased a new hard drive, installed it, and reinstalled Windows 7 x64 using his Dell restore disk. He was unable to get the NVIDIA adapter to work and brought the laptop to me.
Initially I thought it probably just a driver version/release issue, but that has not been the case. The drivers install fine for the adapter, but the adapter never works after the required restart. I have tried numerous drivers, the Dell recommended, the latest WHQL NVIDIA and even Beta version.
There are no options in the bios to enable/disable or tweak the display adapters, and since the Intel adapter is used by default that is what is installed when troubleshooting in linux.
I have found a couple similar issues references on Google, but they ended up only being installation issues concerning the adapter version and the install packages needing an inf edit. That does not apply in this case.
My next step will be to test a new windows install on a different hard drive. If that does not fix the issue then I would think it is the motherboard. I can get a new motherboard for a good price, so that is a viable option if it comes down to it.